Cables, Adapters & Feature Sets
HP Tuners Dodge / Jeep / RAM / Chrysler 2018+ Smart Access Cable
The HP Tuners Smart Access Cable is required for many 2018+ Dodge, Jeep, RAM and Chrysler vehicles. It enables read, write and special functions in supported applications with HP Tuners. On 2018+ Dodge, Jeep, RAM and Chrysler vehicles, access to certain control modules and functions may not always be possible directly through the standard OBD port. The Smart Access Cable provides the required connection so supported functions can be used with the VCM Suite. The cable is also required to log ZF8-HP2 transmission data. An internet connection is required for use. Important: Vehicle support, required credits, control module access and available functions may vary depending on vehicle, model year, engine, transmission and software version. Please check before purchase whether this cable is required for your application. Note: Please follow the relevant HP Tuners installation instructions when installing and using the Smart Access Cable. If you are unsure, you can contact us with your vehicle details before placing your order.
HP Tuners M8 HPTNET Cable for GM E41 ECM Upgrade Kit
The HP Tuners M8 HPTNET Cable is a replacement cable for the GM E41 ECM Upgrade Kit. It is the same cable included with the original GM E41 ECM Upgrade Kit and is used for communication during ECM upgrade procedures. This cable is suitable as a direct replacement if the original cable has been damaged, misplaced or if an additional cable is required. It helps ensure a reliable connection and seamless communication during supported GM E41 ECM upgrade processes. The M8 HPTNET Cable features a durable, high-quality design for repeated use in workshop and tuning environments. The cable length is approximately 3 ft, or around 91 cm. Important: This product is intended as a replacement cable for the HP Tuners GM E41 ECM Upgrade Kit. It is not a complete ECM Upgrade Kit and does not replace any other required components or services. Note: Please check before purchase whether this cable is required for your existing GM E41 ECM Upgrade Kit. If you are unsure, you can contact us before placing your order.
HP Tuners Moto Euro5 OBDII Adapter Cable
The HP Tuners Moto Euro5 OBDII Adapter Cable connects supported Euro5 motorcycles to a compatible HP Tuners MPVI interface. It is required for diagnostics, data logging and calibration of supported motorcycle applications with the VCM Suite. This cable is intended for many modern Euro5-compliant motorcycles and powersports models from around 2021 onwards, including supported Honda and Harley-Davidson applications. It provides the connection between the motorcycle diagnostic port and the HP Tuners interface. To use the cable, plug the Moto Euro5 OBDII Adapter Cable into the motorcycle diagnostic port. The other end connects to the HP Tuners MPVI interface. Supported functions can then be accessed through the VCM Suite. The adapter cable is compact, durable and suitable for use in the workshop, on the dyno or trackside. It is compatible with MPVI3 and newer HP Tuners interfaces. Supported applications include selected Honda models such as CRF1100 Africa Twin, CBR1000RR-R, CB1000R, CBR500 and CB500, as well as currently supported Harley-Davidson motorcycles. Additional model support may be added by HP Tuners. Important: Vehicle support, available functions and required Universal Credits may vary depending on model, model year, engine, control module and software version. Please check before purchase whether your motorcycle is supported and whether this cable is required for your application. Note: This cable is intended for supported Euro5 motorcycles. It does not replace other Honda Powersports 4-Pin or 6-Pin adapter cables if those are required for your vehicle. If you are unsure, you can contact us with your vehicle details before placing your order.
HP Tuners MPVI Battery Power Cable
The HP Tuners MPVI Battery Power Cable is required for supported powersports vehicles that do not have a built-in vehicle battery. It supplies stable power to the ECU from an external 12V battery during diagnostics and flashing procedures. This cable is especially useful for motocross and powersports applications where the ECU cannot be reliably powered by an internal vehicle battery during flashing. By connecting to a separate 12V battery, it provides the required power supply for the control module. The alligator clips connect directly to the positive and negative terminals of an external 12V battery. The OBDII connector plugs into the HP Tuners MPVI interface. The diagnostic port then allows connection to the appropriate powersports OBDII adapter cable or other required adapter. The MPVI Battery Power Cable is intended for supported vehicles without a built-in battery, including selected Honda CRF450R and CRF250R models as well as other supported powersports applications. Important: This cable provides stable ECU power during diagnostics and flashing procedures. It does not replace the vehicle-specific OBDII adapter cable that may also be required depending on the vehicle. Note: Please check before purchase whether your vehicle requires an external power supply for flashing and which adapter cable is required for your application. If you are unsure, you can contact us with your vehicle details before placing your order.
HP Tuners OBDII Adapter Cable for BRP, Can-Am & Sea-Doo
The HP Tuners OBDII Adapter Cable for BRP is required for supported BRP powersports vehicles. This includes various Can-Am models as well as many Sea-Doo personal watercraft applications. The cable provides the connection between the vehicle and a compatible HP Tuners interface. It is required to read, diagnose and, depending on vehicle support, calibrate supported BRP vehicles with the VCM Suite. The OBDII Adapter Cable is compatible with MPVI2 and newer HP Tuners interfaces. The latest version of the VCM Suite software is required for use. Important: Vehicle support, available functions and required ECM licensing may vary depending on model, model year, engine and control module. Please check before purchase whether your BRP, Can-Am or Sea-Doo vehicle is supported and which credits are required. Note: If you are unsure, you can contact us with your vehicle details before placing your order.
HP Tuners OBDII Adapter Cable for Honda Powersports 4-Pin
The HP Tuners OBDII Adapter Cable for Honda Powersports 4-Pin is required for supported Honda Powersports vehicles with a 4-pin diagnostic connector. It provides the connection between the vehicle and a compatible HP Tuners interface for diagnostics, data logging and calibration with the VCM Suite. To use the cable, plug the small 4-pin connector into the vehicle diagnostic port. The OBDII end is then connected to the HP Tuners interface. The interface is connected to the laptop using the USB-C cable supplied with the interface. The Honda Powersports 4-Pin Adapter Cable is intended for use with MPVI2, MPVI2+ and MPVI3 interfaces. The latest version of the VCM Suite software is required for use. Supported Honda Powersports applications with a 4-pin connector include selected CRF, GROM, Monkey, MSX, Pioneer and Talon models. Please check before purchase whether your vehicle uses the 4-pin connector and is supported by HP Tuners. Important: Honda Powersports vehicles may require different adapter cables depending on model and model year. Please make sure whether your vehicle requires the 4-pin or 6-pin adapter cable. Note: Vehicle support, available functions and required Universal Credits may vary depending on model, model year, engine and control module. If you are unsure, you can contact us with your vehicle details before placing your order.
HP Tuners OBDII Adapter Cable for Honda Powersports 6-Pin
The HP Tuners OBDII Adapter Cable for Honda Powersports 6-Pin is required for supported Honda Powersports vehicles with a 6-pin diagnostic connector. It provides the connection between the vehicle and a compatible HP Tuners interface for diagnostics, data logging and calibration with the VCM Suite. To use the cable, plug the small 6-pin connector into the vehicle diagnostic port. The OBDII end is then connected to the HP Tuners interface. The interface is connected to the laptop using the USB-C cable supplied with the interface. The Honda Powersports 6-Pin Adapter Cable is intended for use with MPVI2, MPVI2+ and MPVI3 interfaces. The latest version of the VCM Suite software is required for use. With HP Tuners, supported Honda Powersports applications can be diagnosed, data logged and calibrated depending on vehicle support. This includes viewing important vehicle data, logging on the road, trail or dyno, and editing supported calibration parameters. Important: Honda Powersports vehicles may require different adapter cables depending on model and model year. Please make sure whether your vehicle requires the 4-pin or 6-pin adapter cable. Note: Vehicle support, available functions and required Universal Credits may vary depending on model, model year, engine and control module. If you are unsure, you can contact us with your vehicle details before placing your order.
HP Tuners OBDII Adapter Cable for Polaris, Bobcat & Indian
The HP Tuners OBDII Adapter Cable for Polaris, Bobcat and Indian is required for supported vehicles within the Polaris family. This includes Polaris side-by-side and off-road models, selected Bobcat UTVs and supported Indian Motorcycles. The cable provides the connection between the vehicle diagnostic port and a compatible HP Tuners interface. The grey connector plugs into the vehicle diagnostic port, while the black OBDII end connects to the HP Tuners interface. This adapter cable is required for tuning supported Polaris, Bobcat and Indian applications. It is intended for use with MPVI2, MPVI2+ and MPVI3 interfaces. The latest version of the VCM Suite software is required for use. HP Tuners supports various Polaris models, including Ranger, Ace, Sportsman, RZR and Scrambler. Selected Bobcat UTVs and supported Indian Motorcycle applications are also covered. Important: Vehicle support, available functions and required ECM licensing may vary depending on model, model year, engine and control module. Please check before purchase whether your Polaris, Bobcat or Indian vehicle is supported and which credits or additional services are required. Note: MG1-equipped models also require the appropriate Polaris MG1 ECM Service for tuning. If you are unsure, you can contact us with your vehicle details before placing your order.
HP Tuners OBDII Adapter Cable for Yamaha Marine 3-Pin Diagnostics
The HP Tuners OBDII Adapter Cable for Yamaha Marine 3-Pin Diagnostics allows supported Yamaha marine engines to connect to a compatible HP Tuners interface. It is used for diagnostics, live data display and data monitoring with VCM Scanner. The cable connects the Yamaha 3-pin diagnostic connector to an HP Tuners MPVI3 or MPVI4 interface. When used with VCM Scanner, it allows engine data to be displayed, operating parameters to be monitored and diagnostic trouble codes to be read. This adapter cable is designed specifically for diagnostic access on supported Yamaha marine applications. It is suitable for reviewing engine data, monitoring performance and operating values, and identifying potential issues. Important: This cable is intended for diagnostics and data monitoring only. It does not support writing, flashing or modifying calibrations. For calibration writing, the appropriate Yamaha marine flashing cables are required. To use this cable, an MPVI3 or MPVI4 interface, VCM Suite software and a supported Yamaha marine application are required. Supported applications include selected Yamaha four-stroke outboard engines such as F225, F250, F300, F350 and selected F40–F150 models, depending on the application. Note: Engine support, available diagnostic functions and compatibility may vary depending on model, model year, engine variant and control module. Please check before purchase whether your Yamaha marine engine is supported and whether this diagnostic cable is required for your application.
HP Tuners OBDII Adapter Cable for Yamaha Outboard 34-Pin ECU Style 1
The HP Tuners OBDII Adapter Cable for Yamaha Outboard 34-Pin ECU Style 1 is required for supported Yamaha outboard engines with a 34-pin ECU connector, Style 1. It connects a compatible HP Tuners interface to the Yamaha marine ECM for calibration writing functions. This cable is intended for professional tuners, marine technicians and experienced users who want to work on supported Yamaha marine applications with the VCM Suite. It provides a direct connection to the supported Yamaha ECM and enables communication during the calibration writing process. The cable includes integrated battery alligator clips to provide stable external power to the ECM during the writing process. This is required for marine applications because the engine must remain off while the calibration is being written. Important: This cable is intended for calibration writing only. It is not designed for diagnostics, scanning or data logging. For diagnostics and data monitoring, the Yamaha Marine 3-Pin Diagnostic Cable is required. This cable is intended for Yamaha outboard engines with a 34-pin ECU connector, Style 1. Please verify your engine’s ECU connector type before purchasing. Note: To use this cable, an MPVI3 or MPVI4 interface, VCM Suite software and a supported Yamaha marine application are required. Engine support, available functions and required Universal Credits may vary depending on model, model year, engine variant and control module.
HP Tuners OBDII Adapter Cable for Yamaha Outboard 34-Pin ECU Style 2
The HP Tuners OBDII Adapter Cable for Yamaha Outboard 34-Pin ECU Style 2 is required for supported Yamaha outboard engines with a 34-pin ECU connector, Style 2. It connects a compatible HP Tuners interface to the Yamaha marine ECM for calibration writing functions. This cable is intended for professional tuners, marine technicians and experienced users who want to work on supported Yamaha marine applications with the VCM Suite. It provides a direct connection to the supported Yamaha ECM and enables communication during the calibration writing process. The cable includes integrated battery alligator clips to provide stable external power to the ECM during the writing process. This is required for marine applications because the engine must remain off while the calibration is being written. Important: This cable is intended for calibration writing only. It is not designed for diagnostics, scanning or data logging. For diagnostics and data monitoring, the Yamaha Marine 3-Pin Diagnostic Cable is required. This cable is intended for Yamaha outboard engines with a 34-pin ECU connector, Style 2. Please verify your engine’s ECU connector type before purchasing. Note: To use this cable, an MPVI3 or MPVI4 interface, VCM Suite software and a supported Yamaha marine application are required. Engine support, available functions and required Universal Credits may vary depending on model, model year, engine variant and control module.
HP Tuners OBDII Adapter Cable for Yamaha Outboard 44-Pin ECU Style 2
The HP Tuners OBDII Adapter Cable for Yamaha Outboard 44-Pin ECU Style 2 is required for supported Yamaha outboard engines with a 44-pin ECU connector, Style 2. It connects a compatible HP Tuners interface to the Yamaha marine ECM for calibration writing functions. This cable is intended for professional tuners, marine technicians and experienced users who want to work on supported Yamaha marine applications with the VCM Suite. It provides a direct connection to the supported Yamaha ECM and enables communication during the calibration writing process. The cable includes integrated battery alligator clips to provide stable external power to the ECM during the writing process. This is required for marine applications because the engine must remain off while the calibration is being written. Important: This cable is intended for calibration writing only. It is not designed for diagnostics, scanning or data logging. For diagnostics and data monitoring, the Yamaha Marine 3-Pin Diagnostic Cable is required. This cable is intended for Yamaha outboard engines with a 44-pin ECU connector, Style 2. Please verify your engine’s ECU connector type before purchasing. Note: To use this cable, an MPVI3 or MPVI4 interface, VCM Suite software and a supported Yamaha marine application are required. Engine support, available functions and required Universal Credits may vary depending on model, model year, engine variant and control module.
HP Tuners OBDII Adapter Cable for Yamaha WaveRunner 44-Pin ECU Style 1
The HP Tuners OBDII Adapter Cable for Yamaha WaveRunner 44-Pin ECU Style 1 is required for supported Yamaha WaveRunner applications with a 44-pin ECU connector, Style 1. It connects a compatible HP Tuners interface to the Yamaha WaveRunner ECM for calibration writing functions. This cable is intended for professional tuners, marine technicians and experienced users who want to work on supported Yamaha WaveRunner applications with the VCM Suite. It provides a direct connection to the supported Yamaha ECM and enables communication during the calibration writing process. The cable includes integrated battery alligator clips to provide stable external power to the ECM during the writing process. This is required for marine applications because the engine must remain off while the calibration is being written. Important: This cable is intended for calibration writing only. It is not designed for diagnostics, scanning or data logging. For diagnostics and data monitoring, the Yamaha Marine 3-Pin Diagnostic Cable is required. This cable is intended for Yamaha WaveRunner applications with a 44-pin ECU connector, Style 1. Please verify your application’s ECU connector type before purchasing. Note: To use this cable, an MPVI3 or MPVI4 interface, VCM Suite software and a supported Yamaha marine or WaveRunner application are required. Engine support, available functions and required Universal Credits may vary depending on model, model year, engine variant and control module.
HP Tuners Pro Feature Set for MPVI2 incl. PROLINK Cable
This set includes the HP Tuners Pro Feature Set for MPVI2 interfaces as well as a PROLINK cable for MPVI2. It is designed for users who want to enable additional Pro Features on an MPVI2 interface and add external signals to their data logs. The Pro Feature Set unlocks advanced functions for the MPVI2 interface. This includes PROLINK support and Standalone Data Logging, allowing data to be recorded directly to the interface without being continuously connected to a laptop. The included PROLINK cable allows you to wire in up to two analog signals and one CAN bus signal. This makes it possible to record external measurements such as wideband oxygen, MAP sensor, boost pressure sensor or other additional sensor signals together with vehicle data in VCM Scanner. Standalone Data Logging is especially useful for data collection on the road, track or dyno. Logs can be stored directly on the interface and evaluated later on a PC or laptop. Important: This product is intended for HP Tuners MPVI2 interfaces and includes a PROLINK cable for MPVI2. It is not intended for MPVI2+, MPVI3 or MPVI4 interfaces. PROLINK+ is used for MPVI2+, MPVI3 and MPVI4. Note: Please check which HP Tuners interface you own before purchasing. If you are unsure, please contact us before placing your order.
HP Tuners Pro Feature Set for MPVI2+
The HP Tuners Pro Feature Set for MPVI2+ unlocks advanced functions for your MPVI2+ interface. It is required if you want to use PROLINK+ with an MPVI2+ interface or enable Standalone Data Logging. Standalone Data Logging allows you to record vehicle data directly to the internal storage of your HP Tuners interface without being continuously connected to a laptop. This is especially useful for data collection on the road, track or dyno. When used with PROLINK+, additional external signals can be added to VCM Scanner. PROLINK+ allows you to wire in up to two analog 0–5V signals and one CAN bus signal. This makes it possible to record and evaluate external measurements such as wideband oxygen, MAP sensor, boost pressure sensor or other additional sensor signals together with vehicle data. Important: This product is intended for HP Tuners MPVI2+ interfaces. The PROLINK+ cable is not included and must be ordered separately if required. Note: MPVI3 and MPVI4 interfaces already include the Pro Feature Set as standard. For MPVI3 and MPVI4, only the PROLINK+ cable is required if additional analog or CAN bus signals need to be added.
HP Tuners PROLINK+ for MPVI2+, MPVI3, and MPVI4
The HP Tuners PROLINK+ cable expands the data logging capabilities of your compatible HP Tuners interface. It allows you to wire in up to two analog 0–5V signals and one CAN bus signal for use in VCM Scanner. This makes it possible to add external sensor data such as wideband oxygen sensors, MAP sensors, boost pressure sensors or other measurement signals directly into your data logs. It is especially useful when you want to record additional signals together with vehicle data during calibration work. PROLINK+ features two dedicated analog 0–5V inputs, one 500 kbit/s CAN bus input, a 100 Hz sampling rate and an M8 connector to a 5-wire harness. The cable is compatible with HP Tuners MPVI2+, MPVI3 and MPVI4 interfaces. MPVI3 and MPVI4 already include the Pro Feature Set, so only the PROLINK+ cable is required. Note for MPVI2+ users: Using PROLINK+ with an MPVI2+ interface also requires the HP Tuners Pro Feature Set for MPVI2+ . MPVI3 and MPVI4 already include the Pro Feature Set as standard.