Products

The HP Tuners Smart Access Cable is required for many 2018+ Dodge, Jeep, RAM and Chrysler vehicles. It enables read, write and special functions in supported applications with HP Tuners. On 2018+ Dodge, Jeep, RAM and Chrysler vehicles, access to certain control modules and functions may not always be possible directly through the standard OBD port. The Smart Access Cable provides the required connection so supported functions can be used with the VCM Suite. The cable is also required to log ZF8-HP2 transmission data. An internet connection is required for use. Important: Vehicle support, required credits, control module access and available functions may vary depending on vehicle, model year, engine, transmission and software version. Please check before purchase whether this cable is required for your application. Note: Please follow the relevant HP Tuners installation instructions when installing and using the Smart Access Cable. If you are unsure, you can contact us with your vehicle details before placing your order.

The HP Tuners GM E41 ECM Upgrade Kit is required for supported 2017–2023 Chevrolet Silverado and GMC Sierra 2500/3500 models with the 6.6L Duramax engine. It is intended for L5P and L5D applications with the E41 ECM and enables the required ECM upgrade process for read, write and special functions in VCM Suite. With this kit, the E41 ECM can be upgraded directly in the vehicle without removing the control module from the truck. This helps avoid the risk of damaging tabs or connectors during removal or reinstallation. Depending on the application, the upgrade process can be completed in a short amount of time. A compatible HP Tuners interface is required for use. This kit is compatible with MPVI2+ interfaces with Pro Feature Set and with MPVI3 interfaces. MPVI and standard MPVI2 interfaces are not compatible with this kit. After the ECM upgrade has been completed, supported functions such as diagnostics, data logging, reading, editing and writing calibrations are available through the VCM Suite. According to HP Tuners, no IMMO relearn, crank relearn or “Replace ECM” function is required when using this kit. Important: An E41 ECM upgrade is required for tuning supported 2017–2023 Chevrolet Silverado and GMC Sierra 2500/3500 6.6L Duramax L5P and L5D applications. Each vehicle must also be licensed with 6 HP Tuners Universal Credits during the upgrade process. Universal Credits are not included with this kit and must be purchased separately. In the box: The kit includes an HPTNet cable, an upgrade box and an upgrade cable. Note: Please read the relevant HP Tuners installation instructions carefully before use. Vehicle support, required credits and available functions may vary depending on vehicle, model year, engine, control module and software version. If you are unsure, you can contact us with your vehicle details before placing your order.

The HP Tuners GM E90 / T93 Upgrade Kit is intended for supported GM vehicles equipped with an E90 ECM and T93 TCM. It enables the upgrade process for compatible control modules without removing them from the vehicle. This kit is designed for professional tuners, workshops and experienced users who want to work on supported GM vehicles with the HP Tuners VCM Suite. The upgrade process can be performed directly in the workshop or garage and helps reduce the risk of damaging control modules during removal or reinstallation. The GM E90 ECM is used in selected 2019–2022 Chevrolet Silverado 1500 and GMC Sierra 1500 models with 5.3L and 6.2L V8 engines. This includes L84 and L87 applications in pre-facelift models without Global B architecture. Current note regarding the GM T93 TCM: According to HP Tuners, as of March 17, 2026, the GM T93 TCM no longer needs to be upgraded via send-in service or with this upgrade kit. For supported applications, the T93 TCM can be licensed and tuned as normal directly via OBDII. The GM E90 ECM still requires an upgrade using this kit or an appropriate service. A compatible HP Tuners interface is required for use. This kit is only compatible with MPVI3 and MPVI4 interfaces. MPVI, MPVI2 and MPVI2+ interfaces are not compatible with this kit. The latest version of the VCM Suite software is also required. After the upgrade has been completed, supported functions such as diagnostics, data logging, reading, editing and writing calibrations are available through the VCM Suite. According to HP Tuners, no IMMO relearn, crank relearn or “Replace ECM” function is required when using this kit. Important: Universal Credits are not included with this kit and must be purchased separately. The GM E90 ECM requires 6 Universal Credits for licensing after the upgrade. The GM T93 TCM may require 4 Universal Credits depending on the application. In the box: The kit includes an HPTNet cable for GM E90 ECM, an HPTNet cable for GM T93 TCM, an upgrade box and an upgrade cable. Note: Vehicle support, required credits, available functions and required upgrade steps may vary depending on vehicle, model year, engine, transmission, control module and software version. Please check before purchase whether your vehicle is supported and whether this kit is required for your application. If you are unsure, you can contact us with your vehicle details before placing your order.

The HP Tuners M8 HPTNET Cable is a replacement cable for the GM E41 ECM Upgrade Kit. It is the same cable included with the original GM E41 ECM Upgrade Kit and is used for communication during ECM upgrade procedures. This cable is suitable as a direct replacement if the original cable has been damaged, misplaced or if an additional cable is required. It helps ensure a reliable connection and seamless communication during supported GM E41 ECM upgrade processes. The M8 HPTNET Cable features a durable, high-quality design for repeated use in workshop and tuning environments. The cable length is approximately 3 ft, or around 91 cm. Important: This product is intended as a replacement cable for the HP Tuners GM E41 ECM Upgrade Kit. It is not a complete ECM Upgrade Kit and does not replace any other required components or services. Note: Please check before purchase whether this cable is required for your existing GM E41 ECM Upgrade Kit. If you are unsure, you can contact us before placing your order.

The HP Tuners Moto Euro5 OBDII Adapter Cable connects supported Euro5 motorcycles to a compatible HP Tuners MPVI interface. It is required for diagnostics, data logging and calibration of supported motorcycle applications with the VCM Suite. This cable is intended for many modern Euro5-compliant motorcycles and powersports models from around 2021 onwards, including supported Honda and Harley-Davidson applications. It provides the connection between the motorcycle diagnostic port and the HP Tuners interface. To use the cable, plug the Moto Euro5 OBDII Adapter Cable into the motorcycle diagnostic port. The other end connects to the HP Tuners MPVI interface. Supported functions can then be accessed through the VCM Suite. The adapter cable is compact, durable and suitable for use in the workshop, on the dyno or trackside. It is compatible with MPVI3 and newer HP Tuners interfaces. Supported applications include selected Honda models such as CRF1100 Africa Twin, CBR1000RR-R, CB1000R, CBR500 and CB500, as well as currently supported Harley-Davidson motorcycles. Additional model support may be added by HP Tuners. Important: Vehicle support, available functions and required Universal Credits may vary depending on model, model year, engine, control module and software version. Please check before purchase whether your motorcycle is supported and whether this cable is required for your application. Note: This cable is intended for supported Euro5 motorcycles. It does not replace other Honda Powersports 4-Pin or 6-Pin adapter cables if those are required for your vehicle. If you are unsure, you can contact us with your vehicle details before placing your order.

The HP Tuners MPVI Battery Power Cable is required for supported powersports vehicles that do not have a built-in vehicle battery. It supplies stable power to the ECU from an external 12V battery during diagnostics and flashing procedures. This cable is especially useful for motocross and powersports applications where the ECU cannot be reliably powered by an internal vehicle battery during flashing. By connecting to a separate 12V battery, it provides the required power supply for the control module. The alligator clips connect directly to the positive and negative terminals of an external 12V battery. The OBDII connector plugs into the HP Tuners MPVI interface. The diagnostic port then allows connection to the appropriate powersports OBDII adapter cable or other required adapter. The MPVI Battery Power Cable is intended for supported vehicles without a built-in battery, including selected Honda CRF450R and CRF250R models as well as other supported powersports applications. Important: This cable provides stable ECU power during diagnostics and flashing procedures. It does not replace the vehicle-specific OBDII adapter cable that may also be required depending on the vehicle. Note: Please check before purchase whether your vehicle requires an external power supply for flashing and which adapter cable is required for your application. If you are unsure, you can contact us with your vehicle details before placing your order.

Product information "HP Tuners MPVI4" The HP Tuners MPVI4 is a powerful interface for diagnostics, data logging and vehicle calibration. It connects your vehicle to your laptop via the OBD port and works together with the HP Tuners VCM Suite. With the MPVI4 and the VCM Suite, you can read, edit, write and create extensive data logs from control modules, depending on vehicle support. This gives you access to numerous parameters such as ignition, fuel, torque models, RPM and speed limiters, diagnostic trouble codes and many other calibration tables. The VCM Editor calibration software and the VCM Scanner data logging software are part of the VCM Suite. VCM Editor is used to edit calibration files, while VCM Scanner is used for diagnostics, live data display, trouble code analysis and data logging. The MPVI4 is a professional foundation for tuners, workshops and advanced users who want to analyse vehicle data, edit control modules or use clean data logging for calibration work.

This bundle includes the HP Tuners MPVI4 interface and 2 HP Tuners Universal Credits. It is ideal for users who want to get started with the HP Tuners VCM Suite and require a low number of credits for their vehicle. The MPVI4 connects your vehicle to your laptop via the OBD port and is the hardware foundation for diagnostics, data logging and vehicle calibration with HP Tuners. Together with VCM Editor and VCM Scanner, it allows you to read, edit, write and create extensive data logs from control modules, depending on vehicle support. With the VCM Suite, you gain access to numerous parameters such as ignition, fuel, torque models, RPM and speed limiters, diagnostic trouble codes and many other calibration tables. VCM Scanner also supports diagnostics, live data display, trouble code analysis and data logging. The included 2 Universal Credits can be used to license supported vehicles, control modules or functions. The actual number of credits required depends on the vehicle, model year, engine, transmission, control module and desired functionality. Note: Please check before purchase whether 2 credits are sufficient for your vehicle and desired function. Depending on the vehicle, additional credits, adapters, connection cables or control module unlocks may be required.

This bundle includes the HP Tuners MPVI4 interface and 4 HP Tuners Universal Credits. It is suitable for users who want to get started with the HP Tuners VCM Suite and require a medium number of credits for their vehicle or control module. The MPVI4 connects your vehicle to your laptop via the OBD port and is the hardware foundation for diagnostics, data logging and vehicle calibration with HP Tuners. Together with VCM Editor and VCM Scanner, it allows you to read, edit, write and create extensive data logs from control modules, depending on vehicle support. With the VCM Suite, you gain access to numerous parameters such as ignition, fuel, torque models, RPM and speed limiters, diagnostic trouble codes and many other calibration tables. VCM Scanner also supports diagnostics, live data display, trouble code analysis and data logging. The included 4 Universal Credits can be used to license supported vehicles, control modules or functions. The actual number of credits required depends on the vehicle, model year, engine, transmission, control module and desired functionality. Note: Please check before purchase whether 4 credits are sufficient for your vehicle and desired function. Depending on the vehicle, additional credits, adapters, connection cables or control module unlocks may be required.

This bundle includes the HP Tuners MPVI4 interface and 6 HP Tuners Universal Credits. It is suitable for users who want to get started with the HP Tuners VCM Suite and require a higher number of credits for their vehicle, control module or additional functions. The MPVI4 connects your vehicle to your laptop via the OBD port and is the hardware foundation for diagnostics, data logging and vehicle calibration with HP Tuners. Together with VCM Editor and VCM Scanner, it allows you to read, edit, write and create extensive data logs from control modules, depending on vehicle support. With the VCM Suite, you gain access to numerous parameters such as ignition, fuel, torque models, RPM and speed limiters, diagnostic trouble codes and many other calibration tables. VCM Scanner also supports diagnostics, live data display, trouble code analysis and data logging. The included 6 Universal Credits can be used to license supported vehicles, control modules or functions. The actual number of credits required depends on the vehicle, model year, engine, transmission, control module and desired functionality. Note: Please check before purchase whether 6 credits are sufficient for your vehicle and desired function. Depending on the vehicle, additional credits, adapters, connection cables or control module unlocks may be required.

This Pro Starter Kit includes the HP Tuners MPVI4 interface, 20 HP Tuners Universal Credits and the HP Tuners PROLINK+ cable. It is designed for tuners, workshops and advanced users who want to work professionally with the HP Tuners VCM Suite and license multiple vehicles, control modules or functions. Bundle advantage: The HP Tuners PROLINK+ cable worth €65 is already included in this Starter Kit. Ideal for users who want not only to flash, but also to perform clean data logging and capture additional sensor signals. The MPVI4 connects your vehicle to your laptop via the OBD port and is the hardware foundation for diagnostics, data logging and vehicle calibration with HP Tuners. Together with VCM Editor and VCM Scanner, it allows you to read, edit, write and create extensive data logs from control modules, depending on vehicle support. With the VCM Suite, you gain access to numerous parameters such as ignition, fuel, torque models, RPM and speed limiters, diagnostic trouble codes and many other calibration tables. VCM Scanner also supports diagnostics, live data display, trouble code analysis and data logging. The included 20 Universal Credits can be used to license supported vehicles, control modules or functions. This bundle is especially suitable if you plan to work on multiple vehicles or if additional control modules, such as transmission control modules, need to be supported and licensed. The included PROLINK+ cable expands your data logging capabilities. It allows you to wire in up to two analog signals and one CAN bus signal when used with compatible HP Tuners interfaces. PROLINK+ is compatible with MPVI2+, MPVI3 and MPVI4. Note: The actual number of credits required depends on the vehicle, model year, engine, transmission, control module and desired functionality. Depending on the vehicle, additional adapters, connection cables or control module unlocks may be required.

The HP Tuners OBDII Adapter Cable for BRP is required for supported BRP powersports vehicles. This includes various Can-Am models as well as many Sea-Doo personal watercraft applications. The cable provides the connection between the vehicle and a compatible HP Tuners interface. It is required to read, diagnose and, depending on vehicle support, calibrate supported BRP vehicles with the VCM Suite. The OBDII Adapter Cable is compatible with MPVI2 and newer HP Tuners interfaces. The latest version of the VCM Suite software is required for use. Important: Vehicle support, available functions and required ECM licensing may vary depending on model, model year, engine and control module. Please check before purchase whether your BRP, Can-Am or Sea-Doo vehicle is supported and which credits are required. Note: If you are unsure, you can contact us with your vehicle details before placing your order.

The HP Tuners OBDII Adapter Cable for Honda Powersports 4-Pin is required for supported Honda Powersports vehicles with a 4-pin diagnostic connector. It provides the connection between the vehicle and a compatible HP Tuners interface for diagnostics, data logging and calibration with the VCM Suite. To use the cable, plug the small 4-pin connector into the vehicle diagnostic port. The OBDII end is then connected to the HP Tuners interface. The interface is connected to the laptop using the USB-C cable supplied with the interface. The Honda Powersports 4-Pin Adapter Cable is intended for use with MPVI2, MPVI2+ and MPVI3 interfaces. The latest version of the VCM Suite software is required for use. Supported Honda Powersports applications with a 4-pin connector include selected CRF, GROM, Monkey, MSX, Pioneer and Talon models. Please check before purchase whether your vehicle uses the 4-pin connector and is supported by HP Tuners. Important: Honda Powersports vehicles may require different adapter cables depending on model and model year. Please make sure whether your vehicle requires the 4-pin or 6-pin adapter cable. Note: Vehicle support, available functions and required Universal Credits may vary depending on model, model year, engine and control module. If you are unsure, you can contact us with your vehicle details before placing your order.

The HP Tuners OBDII Adapter Cable for Honda Powersports 6-Pin is required for supported Honda Powersports vehicles with a 6-pin diagnostic connector. It provides the connection between the vehicle and a compatible HP Tuners interface for diagnostics, data logging and calibration with the VCM Suite. To use the cable, plug the small 6-pin connector into the vehicle diagnostic port. The OBDII end is then connected to the HP Tuners interface. The interface is connected to the laptop using the USB-C cable supplied with the interface. The Honda Powersports 6-Pin Adapter Cable is intended for use with MPVI2, MPVI2+ and MPVI3 interfaces. The latest version of the VCM Suite software is required for use. With HP Tuners, supported Honda Powersports applications can be diagnosed, data logged and calibrated depending on vehicle support. This includes viewing important vehicle data, logging on the road, trail or dyno, and editing supported calibration parameters. Important: Honda Powersports vehicles may require different adapter cables depending on model and model year. Please make sure whether your vehicle requires the 4-pin or 6-pin adapter cable. Note: Vehicle support, available functions and required Universal Credits may vary depending on model, model year, engine and control module. If you are unsure, you can contact us with your vehicle details before placing your order.

The HP Tuners OBDII Adapter Cable for Polaris, Bobcat and Indian is required for supported vehicles within the Polaris family. This includes Polaris side-by-side and off-road models, selected Bobcat UTVs and supported Indian Motorcycles. The cable provides the connection between the vehicle diagnostic port and a compatible HP Tuners interface. The grey connector plugs into the vehicle diagnostic port, while the black OBDII end connects to the HP Tuners interface. This adapter cable is required for tuning supported Polaris, Bobcat and Indian applications. It is intended for use with MPVI2, MPVI2+ and MPVI3 interfaces. The latest version of the VCM Suite software is required for use. HP Tuners supports various Polaris models, including Ranger, Ace, Sportsman, RZR and Scrambler. Selected Bobcat UTVs and supported Indian Motorcycle applications are also covered. Important: Vehicle support, available functions and required ECM licensing may vary depending on model, model year, engine and control module. Please check before purchase whether your Polaris, Bobcat or Indian vehicle is supported and which credits or additional services are required. Note: MG1-equipped models also require the appropriate Polaris MG1 ECM Service for tuning. If you are unsure, you can contact us with your vehicle details before placing your order.

The HP Tuners OBDII Adapter Cable for Yamaha Marine 3-Pin Diagnostics allows supported Yamaha marine engines to connect to a compatible HP Tuners interface. It is used for diagnostics, live data display and data monitoring with VCM Scanner. The cable connects the Yamaha 3-pin diagnostic connector to an HP Tuners MPVI3 or MPVI4 interface. When used with VCM Scanner, it allows engine data to be displayed, operating parameters to be monitored and diagnostic trouble codes to be read. This adapter cable is designed specifically for diagnostic access on supported Yamaha marine applications. It is suitable for reviewing engine data, monitoring performance and operating values, and identifying potential issues. Important: This cable is intended for diagnostics and data monitoring only. It does not support writing, flashing or modifying calibrations. For calibration writing, the appropriate Yamaha marine flashing cables are required. To use this cable, an MPVI3 or MPVI4 interface, VCM Suite software and a supported Yamaha marine application are required. Supported applications include selected Yamaha four-stroke outboard engines such as F225, F250, F300, F350 and selected F40–F150 models, depending on the application. Note: Engine support, available diagnostic functions and compatibility may vary depending on model, model year, engine variant and control module. Please check before purchase whether your Yamaha marine engine is supported and whether this diagnostic cable is required for your application.

The HP Tuners OBDII Adapter Cable for Yamaha Outboard 34-Pin ECU Style 1 is required for supported Yamaha outboard engines with a 34-pin ECU connector, Style 1. It connects a compatible HP Tuners interface to the Yamaha marine ECM for calibration writing functions. This cable is intended for professional tuners, marine technicians and experienced users who want to work on supported Yamaha marine applications with the VCM Suite. It provides a direct connection to the supported Yamaha ECM and enables communication during the calibration writing process. The cable includes integrated battery alligator clips to provide stable external power to the ECM during the writing process. This is required for marine applications because the engine must remain off while the calibration is being written. Important: This cable is intended for calibration writing only. It is not designed for diagnostics, scanning or data logging. For diagnostics and data monitoring, the Yamaha Marine 3-Pin Diagnostic Cable is required. This cable is intended for Yamaha outboard engines with a 34-pin ECU connector, Style 1. Please verify your engine’s ECU connector type before purchasing. Note: To use this cable, an MPVI3 or MPVI4 interface, VCM Suite software and a supported Yamaha marine application are required. Engine support, available functions and required Universal Credits may vary depending on model, model year, engine variant and control module.

The HP Tuners OBDII Adapter Cable for Yamaha Outboard 34-Pin ECU Style 2 is required for supported Yamaha outboard engines with a 34-pin ECU connector, Style 2. It connects a compatible HP Tuners interface to the Yamaha marine ECM for calibration writing functions. This cable is intended for professional tuners, marine technicians and experienced users who want to work on supported Yamaha marine applications with the VCM Suite. It provides a direct connection to the supported Yamaha ECM and enables communication during the calibration writing process. The cable includes integrated battery alligator clips to provide stable external power to the ECM during the writing process. This is required for marine applications because the engine must remain off while the calibration is being written. Important: This cable is intended for calibration writing only. It is not designed for diagnostics, scanning or data logging. For diagnostics and data monitoring, the Yamaha Marine 3-Pin Diagnostic Cable is required. This cable is intended for Yamaha outboard engines with a 34-pin ECU connector, Style 2. Please verify your engine’s ECU connector type before purchasing. Note: To use this cable, an MPVI3 or MPVI4 interface, VCM Suite software and a supported Yamaha marine application are required. Engine support, available functions and required Universal Credits may vary depending on model, model year, engine variant and control module.

The HP Tuners OBDII Adapter Cable for Yamaha Outboard 44-Pin ECU Style 2 is required for supported Yamaha outboard engines with a 44-pin ECU connector, Style 2. It connects a compatible HP Tuners interface to the Yamaha marine ECM for calibration writing functions. This cable is intended for professional tuners, marine technicians and experienced users who want to work on supported Yamaha marine applications with the VCM Suite. It provides a direct connection to the supported Yamaha ECM and enables communication during the calibration writing process. The cable includes integrated battery alligator clips to provide stable external power to the ECM during the writing process. This is required for marine applications because the engine must remain off while the calibration is being written. Important: This cable is intended for calibration writing only. It is not designed for diagnostics, scanning or data logging. For diagnostics and data monitoring, the Yamaha Marine 3-Pin Diagnostic Cable is required. This cable is intended for Yamaha outboard engines with a 44-pin ECU connector, Style 2. Please verify your engine’s ECU connector type before purchasing. Note: To use this cable, an MPVI3 or MPVI4 interface, VCM Suite software and a supported Yamaha marine application are required. Engine support, available functions and required Universal Credits may vary depending on model, model year, engine variant and control module.

The HP Tuners OBDII Adapter Cable for Yamaha WaveRunner 44-Pin ECU Style 1 is required for supported Yamaha WaveRunner applications with a 44-pin ECU connector, Style 1. It connects a compatible HP Tuners interface to the Yamaha WaveRunner ECM for calibration writing functions. This cable is intended for professional tuners, marine technicians and experienced users who want to work on supported Yamaha WaveRunner applications with the VCM Suite. It provides a direct connection to the supported Yamaha ECM and enables communication during the calibration writing process. The cable includes integrated battery alligator clips to provide stable external power to the ECM during the writing process. This is required for marine applications because the engine must remain off while the calibration is being written. Important: This cable is intended for calibration writing only. It is not designed for diagnostics, scanning or data logging. For diagnostics and data monitoring, the Yamaha Marine 3-Pin Diagnostic Cable is required. This cable is intended for Yamaha WaveRunner applications with a 44-pin ECU connector, Style 1. Please verify your application’s ECU connector type before purchasing. Note: To use this cable, an MPVI3 or MPVI4 interface, VCM Suite software and a supported Yamaha marine or WaveRunner application are required. Engine support, available functions and required Universal Credits may vary depending on model, model year, engine variant and control module.

With our HP Tuners PCM Unlock Service, we prepare supported Dodge, Chrysler, Jeep and RAM control modules for use with the HP Tuners VCM Suite. The unlock is performed in-house by Schropp Tuning. You send us your original or compatible spare PCM, we perform the unlock and then return the control module to you. This service is required for many 2015+ Dodge, Chrysler, Jeep and RAM vehicles in order to read, write and edit the PCM with HP Tuners. Once the unlock has been completed, the control module can be diagnosed and data logged with VCM Scanner and edited with VCM Editor, depending on vehicle support. Supported applications include many FCA vehicles with PCM types such as GPEC2, GPEC2A and GPEC4. Exact compatibility depends on the vehicle, model year, engine, control module and software version. Important for 2018+ models: Many 2018+ Dodge, Chrysler, Jeep and RAM vehicles also require the HP Tuners Dodge 2018+ Smart Access Cable in order to work with the vehicle via OBD. This cable is not included with the unlock service and must be ordered separately if required. Universal Credits are not included: Additional HP Tuners Universal Credits are required to license the vehicle in the VCM Suite. The number of credits required depends on the vehicle and control module and is not included in the price of this unlock service. Please enter in the order comment: make, model, model year, engine, VIN and, if known, the PCM type. This information helps us process the order correctly and avoid delays. Important send-in notes: Please send in the PCM only, without brackets, rubber isolators, additional mounting parts or unnecessary accessories. Control modules with damaged connectors, broken locking tabs or visible housing damage may not be suitable for the unlock service. Note: This service is a one-time unlock of the submitted control module. Processing time depends on workload, shipping time and the condition of the control module. If you are unsure, you can contact us with your vehicle details before placing your order.

This set includes the HP Tuners Pro Feature Set for MPVI2 interfaces as well as a PROLINK cable for MPVI2. It is designed for users who want to enable additional Pro Features on an MPVI2 interface and add external signals to their data logs. The Pro Feature Set unlocks advanced functions for the MPVI2 interface. This includes PROLINK support and Standalone Data Logging, allowing data to be recorded directly to the interface without being continuously connected to a laptop. The included PROLINK cable allows you to wire in up to two analog signals and one CAN bus signal. This makes it possible to record external measurements such as wideband oxygen, MAP sensor, boost pressure sensor or other additional sensor signals together with vehicle data in VCM Scanner. Standalone Data Logging is especially useful for data collection on the road, track or dyno. Logs can be stored directly on the interface and evaluated later on a PC or laptop. Important: This product is intended for HP Tuners MPVI2 interfaces and includes a PROLINK cable for MPVI2. It is not intended for MPVI2+, MPVI3 or MPVI4 interfaces. PROLINK+ is used for MPVI2+, MPVI3 and MPVI4. Note: Please check which HP Tuners interface you own before purchasing. If you are unsure, please contact us before placing your order.

The HP Tuners Pro Feature Set for MPVI2+ unlocks advanced functions for your MPVI2+ interface. It is required if you want to use PROLINK+ with an MPVI2+ interface or enable Standalone Data Logging. Standalone Data Logging allows you to record vehicle data directly to the internal storage of your HP Tuners interface without being continuously connected to a laptop. This is especially useful for data collection on the road, track or dyno. When used with PROLINK+, additional external signals can be added to VCM Scanner. PROLINK+ allows you to wire in up to two analog 0–5V signals and one CAN bus signal. This makes it possible to record and evaluate external measurements such as wideband oxygen, MAP sensor, boost pressure sensor or other additional sensor signals together with vehicle data. Important: This product is intended for HP Tuners MPVI2+ interfaces. The PROLINK+ cable is not included and must be ordered separately if required. Note: MPVI3 and MPVI4 interfaces already include the Pro Feature Set as standard. For MPVI3 and MPVI4, only the PROLINK+ cable is required if additional analog or CAN bus signals need to be added.

The HP Tuners PROLINK+ cable expands the data logging capabilities of your compatible HP Tuners interface. It allows you to wire in up to two analog 0–5V signals and one CAN bus signal for use in VCM Scanner. This makes it possible to add external sensor data such as wideband oxygen sensors, MAP sensors, boost pressure sensors or other measurement signals directly into your data logs. It is especially useful when you want to record additional signals together with vehicle data during calibration work. PROLINK+ features two dedicated analog 0–5V inputs, one 500 kbit/s CAN bus input, a 100 Hz sampling rate and an M8 connector to a 5-wire harness. The cable is compatible with HP Tuners MPVI2+, MPVI3 and MPVI4 interfaces. MPVI3 and MPVI4 already include the Pro Feature Set, so only the PROLINK+ cable is required. Note for MPVI2+ users: Using PROLINK+ with an MPVI2+ interface also requires the HP Tuners Pro Feature Set for MPVI2+ . MPVI3 and MPVI4 already include the Pro Feature Set as standard.